1×N MEMS Optical Switch
Teosco MEMS Optical Switch is based on micro-electro-mechanical system (MEMS) technology to control and switch the optical path. The components are compact structure, low insertion loss, fast switching speed, highly repeatability and stability by rotating the mirror of MEMS chip. MEMS OSW is widely used in optical cross and connection (OXC) system, optical add/drop system, measure instrument system and optical signal monitoring system. They are available in any 1xN configuration. The products are Telcordia GR-1209-CORE and GR-1221-CORE compliance, and RoHS compliance.
Parameters
|
Parameters |
1xN MEMS Optical Switch |
||
|
Operating Wavelength (nm) |
1525~1565 | ||
|
OSW Channels |
2/4/6/8/10/12/16 |
||
|
Insertion Loss (dB) |
≤ 1.0 | ||
|
Return Loss (dB) |
≥ 50 | ||
|
Crosstalk (dB) |
≥ 50 |
||
|
Polarization Dependent Loss (dB) |
≤ 0.15 |
||
|
Wavelength Dependent Loss (dB) |
≤ 0.3 |
||
|
Temperature Dependent Loss (dB) |
≤ 0.3 |
||
|
Repeatability (dB) |
≤ 0.1 |
||
|
Switch Time (ms) |
≤ 30 |
||
|
Durability (times) |
≥ 10 million |
||
|
Operating Voltage (V) |
≤ 60 |
||
|
Switch Mode |
Non-latching |
||
|
Optical Power (mW) |
≤ 500 |
||
|
Operating Temperature (℃) |
-5~+70 |
||
|
Storage Temperature (℃) |
-40~+85 |
||
|
Package Dimension (mm) |
φ5.5×42 |
Pin Configuration
|
Pin NO. |
Property |
Note |
|
Pin 1 |
GND |
|
|
Pin 2 |
Anode(+) |
Vx |
|
Pin 3 |
Anode(+) |
Vy |
Mechanical Dimensions
φ5.5×42 mm.
Order Information
|
MSOSW |
XXX |
XXXX |
X |
XX |
XXX |
XX |
X |
|
|
Type |
Wavelength |
Switch Mode |
Fiber Type |
Fiber Jacket |
Fiber Length |
Connector |
|
MEMS Optical Switch |
102=1x2 104=1x4 106=1x6 ... ... XX=Specify |
0850=850nm 1310=1310nm 1490=1490nm 1550=1550nm 1625=1625nm 1650=1650nm |
Y=Latching N=Non-latching |
MM=Multi-mode Fiber SM=Single-mode Fiber |
025=250um Bare Fiber 090=900um Loose Tube 200=2.0mm Loose Tube 300=3.0mm Loose Tube
|
05=0.5m 10=1.0m 15=1.5m 20=2.0m 25=2.5m XX=Specify |
0=None 1=LC/PC 2=LC/APC 3=SC/PC 4=SC/APC 5=FC/PC 6=FC/APC X=Specify |
